UV Erasing Equipment  Spectroline

PE-Series - 9 to 12 Eproms - Small Desktop Units - 11 to 13 minutes

Spectroline PE Series UV EPROM erasing lamps are specially designed for personal and small system users. These lamps are the most economical choice for fast and complete EPROM erasure.

In as little as 11 to 13 minutes, you can completely erase the programmed memories of up to 9 to 12 EPROM chips. High intensities are ensured with powerful short wave UV (254nm) tubes and specially designed specular aluminum reflectors. PE 140T and PE 240T feature the added convenience of a 60­minute timer for automatic unit shut off. And because all PE Series erasers are equipped with a conductive foam pad, your valuable EPROM chips are protected from damaging electrostatic charge. 

PE Series lamps also feature numerous operator safeguards. The UV tubes are fully shielded within an attractive aluminum housing with built in light indicators to signal when the tubes are lit. A safety interlock prevents the units from operating when open or improperly closed, thus protecting users from accidental exposure to potentially dangerous UV. All 115 volt models are UL listed and CSA approved. The 230 volt models are CE approved.

Because Spectroline PE Series EPROM erasers feature both superior design and performance, they are recommended by leading computer programmer and EPROM chip manufacturers throughout the world. 

PL-Series - 25 to 42 Eproms - PC boards to 4X9" - 6 to 11 minutes

Spectroline PR and PL Series UV EPROM Erasing Lamps are ideal for data processing centers and other medium volume EPROM users. Three models are available to meet your specific needs, each designed to accommodate small PC boards.

The PR Series lamps feature high intensity grid tubes for extremely fast and efficient erasing. In as little as 6 minutes, these lamps completely erase EPROMs on PC boards up to 4 x 9 (10.2 x 22.9cm). The PR 320T also accommodates as many as 42 individual EPROMs, while the PR125T holds up to 25 EPROMs.

The compact and economical PL 265T lamp erases PC boards up to 4 x 9" or up to 30 EPROM chips. Its two 6­watt tubes erase programmed memories in as little as 11 minutes. 

All lamps are attractively styled with anodized aluminum housings for rugged durability. A specular aluminum reflector assures maximum short wave UV (254nm) intensity. And the loading drawer contains a removable tray insert which is adjustable to varying heights to ensure optimum exposure. 

PR and PL Series EPROM erasers also feature numerous safeguards to protect both the user and the devices. Built in light indicators signal when the tubes are lit, and a safety interlock prevents operation unless the drawer is fully closed. Thus, the user cannot be accidentally exposed to harmful UV. A 60 minute timer automatically shuts off the unit at the end of each erasing cycle, prolonging the life of both the tubes and EPROMs. A conductive foam pad protects chips from electrostatic build‑up. All models are UL listed for extra safety.

     PC - Series - Super Fast High Capacity models - 84 to 336 Eproms - PC Boards 8X12" to 32X12" - High-intensity Grid Lamps erase full loads in as little as 5 1/2 minutes   

We offer the very best pricing and service in the industry please call us at 800-760-3820 or email us at sales@generaldevice.com

Spectroline PC Series UV EPROM Erasing Cabinets are specially designed for high volume production requirements. They provide up to four times the throughput of competitive systems. These large capacity cabinets accommodate PC boards up to 12 x 32"(30.5 x 81.3cm). 

In as little as 5 1/2minutes (based on 6W sec/cm2 EPROMs), high‑intensity short wave UV (254nm) grid lamps completely erase programmed memories. The quartz grids are mounted on a specular aluminum reflector, providing a typical peak intensity of 18,500 uW/cm2 . These 8 x 8” (20.3 x 20.3cm) modular assemblies feature a special drop‑in design which makes replacement quick and easy. 

Depending on the cabinet, erasing capacities range from 84 to 336 EPROMs, as well as varying quantities of silicon wafers, metric cards, and PC boards. In addition, the PC 3300A and PC 4400A will accommodate open-face stocking tubes. 

The cabinets are attractively styled with anodized aluminum housings for rugged durability and may be stacked to save bench space. They have a 60 minute timer which automatically shuts off operation at the end of the erasing cycle. 

PC Series EPROM erasers also feature numerous safeguards to protect both the user and the devices. Built‑in light indicators signal when the grids are lit, and a safety interlock prevents operation unless the loading drawer is fully closed. Thus, the user cannot be accidentally exposed to harmful UV.